VMware vSphere NSX 6.3.3 Step-By-Step Installation : Howto


NSX Manager Deployment

1. NSX Manager

It will automatically install all the required component as per request Like NSX controller.

2. NSX Controllers: Need to be deploy in odd number like 3 or 5.

3. Edge

4. Distributed Router Controllers


Now First you need to Create NSX Cluster this is not compulsion but suggested or i have created one Resource pool with Expandable check.


Download the OVA file from VMware website.



NSX Components Layer where they Installed.

Data Plane: On ESXi host

          a) Kernel Modules: VXLAN (16 Million VXLAN Segment)

b) Distributed Logical Router (DLR)

c) Distributed Firewall (DFW)

d) VDS switch and Edge Service Appliance.

Control Plane:

             a) NSX Controllers

b) User World Agent

c) Logical Router Control VM

Management Plane:

             a) vCenter Server

b) NSX Manager

             c) Message Bus


Deployment of NSX Manager:

1. Only One NSX manager per vCenter Server.

2. Deploy as a VM.

3. What if my NSX manager is Shutdown: No worries, everything continues to work but you will not able to change anything. No Service impact.

Solution: Protect with vSphere HA.

NSX manager Virtual Machine Requirement: reference vmware doc.

1. 4 vCPUs

2. 16 GB of RAM

3. 60 GB of Storage

Steps for Installation:

1. Right-Click on the cluster in which you would like to deploy the NSX Manager OVA and choose “Deploy OVF Template”

2017-09-12 14_46_23-vSphere Web Client


2. Browse the file and Click next.


3. Select the Resources

2017-09-12 14_50_12-vSphere Web Client

4. Review the details and click Next.


5. Accept the License agreements and click next.


6. Select Storage and click next.


7. Now Provide Network from VDS.


8. Provide IP details, CLI password and DNS sever click next and finish.


After installation you will see new icon with Networking & Security.


when you click on Dashboard option on the left hand side then you can see that status of NSX Manager and Host Preparation Status.


When you click on Installation Option then it will show you NSX manager and it’s controller nodes name and status.

2017-09-12 16_07_09-vSphere Web Client

Now under Installation you have multiple tabs like Management, Host Preparation, Logical Network Preparation and Service deployments

Click on the Host Preparation and you can see whether NSX manager module vCenter, NSX Manager, EAM(ESX Agent Manager) is installed or not.

These are the VIB which will be install.




Open Putty session for ESXi host.


[root@esx002291:~] esxcli software vib list
Name                                                           Version                                Vendor  Acceptance Level  Install Date
—————————–  ——————————————————————-  ——  —————-  ————

esx-vsip                                            6.5.0-0.0.5534171                      VMware  VMwareCertified   2017-07-19
esx-vxlan                                         6.5.0-0.0.5534171                      VMware  VMwareCertified   2017-07-19